LONWORKSâ NET CONTROL

  

H 

idth="327"x

Radio Router RR1200

RadioRouter RR1200, intelligent communication module connects FTT-10 LonWorks Networks trough standard Radio Transceivers, sending and receiving data packets. 600bps/1,2kbps FSK Modulation tones.

The Router can be programmed in the following operation modes:Learning, Bridge,Repeater or configured Router. Based on RTR10 module.

Preprogrammed delay on PTT pin from 100 to 300 msec.

Manual Download

Price

Pin Description
Specifications 
Pin Description Connected to
1   FTT-10      LonWorks Network
2   FTT-10      LonWorks Network
3   VCC         Positive Power Supply___
4   GND         Ground Power Supply
5   PTT         Radio Transceiver PTT
6   DCD IN      Radio Transceiver DCD
7   TX Audio    Radio Audio In or MIC
8   Rx Audio    Radio Audio Out
 
Power             : 8-24Vdc
Consumption   : 100mA MAX
Channels         : 2, (78Kbps FTT-10, 0.6/1,2Kbps Modem)
Operation T°    : -10°C a 60°C
Modem           : FSK, Bell202, 1Vpp
Size               : L x W x H 105x90x70(mm)
Assembly       : DIN slot
Display           : Led's 3mm (Packet, PTT, Cnf A, Cnf B)

H 

idth="327"x
 Digital NETCONTROL NODE  LW-D08 & Programable GATEWAY 
LW-D08 node, for interoperable LonWorks networks, is a 
programmable device with 8 I/O configurable channels.  
Programmable Logic control applications on distributed 
systems.
Supplied with a very usefully basic program.As Programmable 
Gateway the unit include an RS-232 port with a MODBUS RTU 
SLAVE protocol program. LonWorks Network variables are 
mapped to MODBUS. RS-232 Speed 600->4800 bps.
Download Manual   Price

Pin Description
Specifications 
Pin Description     Pin Description_______
15  FTT-10 LonWorks 28  I/O 3
16  FTT-10 LonWorks 27  Gnd
14  Gnd             26  I/O 4
13  V               25  Gnd
34  I/O 0           24  I/O 5
33  Gnd             23  Gnd
32  I/O 1           22  I/O 6
31  Gnd             21  Gnd
30  I/O 2           20  I/O 7
29  Gnd             19  Gnd
 
 Power Supply : 8-24Vdc
 Consumption  : 80mA
 I/O Channels   : 8 I/O digital. Jumper selectable.
 Range            : In: Dry Contact, Out: Open collector.
 Communications: FTT-10, 78Kbps network
 RS-232 Modbus RTU SLAVE 600-4800 bps/ DCD required  
 Operation T°   : -10°C a 60°C
 Size               : L x W x H 105x90x70(mm)
 Assembly      : DIN slot
 Display          : Led's 3mm (Power, Status)

 

 

 

 

 

H 

idth="327"x
 
Analog NETCONTROL NODE LW-A08 (Análogo)
LW-A08 node, for interoperable LonWorks networks, is a  programmable device with 8 Analog Inputs.

Programmable  logic control applications on distributed systems.

Supplied with a very usefully basic program, source code. 12 Bit resolution per Channel, 0.2% and jumper selectable 0-20 mA or 0-5 VDC inputs.

 
Download Manual   Price

Pin Description

Specifications 

Pin Description   Pin  Description_______
15  Red LW FTT-10  28  Input 3
16  Red LW FTT-10  27  Gnd
14  Gnd            26  Input 4
13  Vcc            25  Gnd
34  Input 0        24  Input 5
33  Gnd            23  Gnd
32  Input 1        22  Input 6
31  Gnd            21  Gnd
30  Input 2        20  Input 7
29  Gnd            19  Gnd
 
Power Supply  : 8-24Vdc
Consumption   : 80mA
Input Channels: 8 Analog 12 Bit resolution, 0.2%FS error.
Range         : 0-20 mA / 0- 5 VDC
Communications: FTT-10, 78Kbps network
Operation T°  : -10°C a 60°C
Size          : L x W x H 105x90x70(mm)
Assembly      : DIN slot
Display       : Led's 3mm (Power, Status)

 

 

 

 

H 

ENERGY NETCONTROL NODE LWE03 (3 Phase)
          
LW-E03 node, for interoperable LonWorks networks, is a  programmable device.
With 3 Voltage Inputs and 3 Current Inputs, unit obtain
True RMS Power, Reactive Power, RMS Voltage and RMS Current, ENERGY kWh.

Range, from 0-500 VAC and 0-5 AAC with external transformers.
Download Manual   Price

Pin Description

Specifications 

Pin Description   Pin  Description_______
15  NET LW FTT-10  28  Input 3
16  NET LW FTT-10  27  Gnd
14  Gnd            26  Input 4
13  Vcc            25  Gnd
34  Input          24  Input 5
33  Gnd            23  Gnd
32  Input 1        22  Input 6
31  Gnd            21  Gnd
30  Input 2        20  Input 7
29  Gnd            19  Gnd
 
Power Supply  : 8-24Vdc
Consumption   : 80mA
Input Channels: 6 Analog 12 Bit resolution, 0.2%FS error.
Range         : 
Communications: FTT-10, 78Kbps network
Operation T°  : -10°C a 60°C
Size          : L x W x H 105x90x70(mm)
Assembly      : DIN slot
Display       : Led's 3mm (Power, Status)