SISCAM NODE WORKS
H

 
idth="327"x
 Radio Router RR1200
RadioRouter RR1200, intelligent communication module connects FTT-10 LonWorks Networks trough standard Radio Transceivers, sending and receiving data packets. 600bps/1,2kbps FSK Modulation tones. The Router can be programmed in the following operation modes:Learning, Bridge,Repeater or configured Router. Based on RTR10 module. Preprogrammed delay on PTT pin from 100 to 300 msec.

Pin Description
 Specifications
 
Pin Description Connected to
1   FTT-10      LonWorks Network
2   FTT-10      LonWorks Network
3   VCC         Positive Power Supply___
4   GND         Ground Power Supply
5   PTT         Radio Transceiver PTT
6   DCD IN      Radio Transceiver DCD
7   TX Audio    Radio Audio In or MIC
8   Rx Audio    Radio Audio Out

Power         : 8-24Vdc
Consumption   : 100mA MAX
Channels      : 2, (78Kbps FTT-10, 0.6/1,2Kbps Modem)
Operation T°  : -10°C a 60°C
Modem         : FSK, Bell202, 1Vpp
Size          : L x W x H 105x90x70(mm)
Assembly      : DIN slot
Display       : Led's 3mm (Packet, PTT, Cnf A, Cnf B)


  





  

    H

    
idth="327"x

	
Digital NETCONTROL NODE  LW-D08 & Programable GATEWAY


LW-D08 node, for interoperable LonWorks networks, is a 
programmable device with 8 I/O configurable channels.  
Programmable Logic control applications on distributed 
systems.
Supplied with a very usefully basic program.As Programmable 
Gateway the unit include an RS-232 port with a MODBUS RTU 
SLAVE protocol program. LonWorks Network variables are 
mapped to MODBUS. RS-232 Speed 600->4800 bps. 







  

     
  





  

    Pin Description

    
	Specifications

  

  

    
	

Pin Description     Pin Description_______
15  FTT-10 LonWorks 28  I/O 3
16  FTT-10 LonWorks 27  Gnd
14  Gnd             26  I/O 4
13  V               25  Gnd
34  I/O 0           24  I/O 5
33  Gnd             23  Gnd
32  I/O 1           22  I/O 6
31  Gnd             21  Gnd
30  I/O 2           20  I/O 7
29  Gnd             19  Gnd



 

Power Supply  : 8-24Vdc
Consumption   : 80mA
I/O Channels  : 8 I/O digital. Jumper selectable.
Range         : In: Dry Contact, Out: Open collector.
Communications: FTT-10, 78Kbps network
  RS-232 Modbus RTU SLAVE 600-4800 bps/ DCD required  
Operation T°  : -10°C a 60°C
Size          : L x W x H 105x90x70(mm)
Assembly      : DIN slot
Display       : Led's 3mm (Power, Status)



  





  

    H

    
idth="327"x

	
Analog NETCONTROL NODE LW-A08 (Análogo)


LW-A08 node, for interoperable LonWorks networks, is a  
programmable device with 8 Analog Inputs. Programmable   
Logic control applications on distributed systems. 
Supplied with a very usefully basic program, source code. 12 
Bit resolution per Channel, 0.2% and jumper selectable 0-20 mA 
or 0-5 VDC inputs.







  

    Pin Description

    
	Specifications

  

  

    
	

Pin Description   Pin  Description_______
15  Red LW FTT-10  28  Input 3
16  Red LW FTT-10  27  Gnd
14  Gnd            26  Input 4
13  Vcc	           25  Gnd
34  Input 0        24  Input 5
33  Gnd            23  Gnd
32  Input 1        22  Input 6
31  Gnd	           21  Gnd
30  Input 2        20  Input 7
29  Gnd            19  Gnd




 

Power Supply  : 8-24Vdc
Consumption   : 80mA
Input Channels: 8 Analog 12 Bit resolution, 0.2%FS error.
Range         : 0-20 mA / 0- 5 VDC
Communications: FTT-10, 78Kbps network
Operation T°  : -10°C a 60°C
Size          : L x W x H 105x90x70(mm)
Assembly      : DIN slot
Display       : Led's 3mm (Power, Status)